Coatgauge
Pull-off Type (For Vertical use only)
- lt consists of a-Force gauge & a Slide mounted on a bracket Siide is operated by handwheel
- Force gauge can be checked for accuracy seperately.
- Traceable certificate provided if required
- Zero adjust for spot calibration.
- Initiat holding force is accounted for unlike Nlonsanto.
- Red Pointer retains the maximum reading'
- Acrylic dome cover prevent broken table pieces flying of all over.
Remodeling Electrical Systems
Recessed lighting entails placing decorative fixtures directly into the ceiling, fitting flush with the ceiling. Although it can be done on a completed house, it’s best done during construction. A professional electrician from Windfall will mean the difference in achieving your goals in cost-efficient and timely way. The electrician will protect the existing system while adding a touch of glamour to the new system. Also, remodeling will ensure the safety, and efficiency of the entire household.
| Coatmeasure | M2s | C2s | (M&C)2s | M6s | M12s | C4s | |
|---|---|---|---|---|---|---|---|
| Range / Resolution | microns | (0-20)/0.1 (20-2000)/1 | (0-20)/0.1 (20-2000)/1 | (0-1000)/01 (1000-6000)/10 | (0-1000)/01 (1000-4000)/10 | ||
| mm | (0-1)/0.001 (1-12)/0.010 | ||||||
| Accuracy | microns | 1 or 1% | 2 or 1.5% | Refer | 10 or 1% | 10 or 1% | 10 or 1% |
| Probe Size, Dia. x Length | mm | 14 x 30 | 18 x 44 | M2s | 17 x 30 | 30 x 45 | 18 x 44 |
| Min. Base thickness | mm | 0.3 | 0.3 | & | 0.3 | 0.5 | 0.3 |
| Min. Area For Flat - a circle of dia. | mm | 10 | 11.5 | C2s | 11.5 | 23 | 11.5 |
| Min. dia. for Cylinder - outside | mm | 6 | 8 | 8 | 10 | 8 | |
| Min. dia. for Cylinder - inside | mm | 15 | 20 | 20 | 40 | 20 | |
| Min. radius for Spherical Surface, Outside | mm | 8 | 10 | 10 | 20 | 10 | |
| Min. radius for Spherical Surface, Inside | mm | 15 | 20 | 20 | 30 | 20 | |
Request a Free Quote
